U
U
s
s
e
e
r
r
m
m
a
a
n
n
u
u
a
a
l
l
27
14. Menu “Conditional
Access”
1.When you enter to “Conditional Access” menu,
you will see a screen like below:
14.1. CA Setting
Receiver provide one CA slot for user to use.
Receiver has build in smart card module with
CONAX system. By using cards in this system
provided by operators, it is possible to watch
many scrambled channels coded in this system.
This menu shows detailed information about card
inserted into card reader module. It allows
inserted according to help messages visible on the
bottom of the screen.
Note:
All information showed in this menu and submenu
are coming from inserted card. In case if anything
is wrong, it could be card problem. After inserting
the card correctly at any time, a message-box will
show on the screen with message about detecting
the card, in "card info" menu all available
information will be displayed.
14.2. Common Interface (Optional)
We provide one CI slots for user to use. Using
different CAM & cards provided by different CAS
operator, you can view many type of scrambled
channels.
In this menu you can see the detail information of
the CAM & cards inserted in the slots. You can
check all this information according to the help
message at the bottom of each menu.
Note:
All information showed in this menu and submenu
is abstract from CAM & card. In case something is
wrong, it may be the problem of CAM or card.
When you insert the CAM correctly at any time, a
message will show in the screen to tell you that
which CAM has been detected by the receiver and
is available now.
15. Menu “USB”
If you enter to the "USB" Menu, you will see the
picture like the below:
Note:
If no USB Hard Disk insert to the receiver this
menu is not available.
To Next Page
Loading...
