Opticum HD X403P - 12. Menu Preferences; Language, Parental Control, and Time Settings

U
U
s
s
e
e
r
r
m
m
a
a
n
n
u
u
a
a
l
l
21
2.Menu Lock determining that when user wish to
enter “Installation” menu, whether have to input
Password or not. If the setting of “Menu Lock” is
“Yes” which means user have to key in password,
set “No” means unlock.
3.Channel Lock determining that when user wish
to play the lock channels, whether have to input
the password or not. If the setting is “Yes”, play
the channels with lock mark will show up a
dialogue on the screen and ask for the password.
If the setting of “Channel Lock ”is “No”, the Lock
function will invalid.
4.New Password is used for revising password; you
can input the new password in this item by using
number keys directly. After you filled in 4 digital
numbers, the highlight will auto skip to Confirm
Password and ask you to input the new password
again. If the password is correct, the screen will
show up a message of “Change password
successfully”.
5.You can press [EXIT] key to enter full screen
playing mode.
12.3. Time setting
When you enter to “Time Setting” menu, you will
see the screen like below:
1.GMT Usage: This item is use for open the usage
of GMT. You can press [←/→] keys to switch
“On/Off”.
2.GMT Offset: This item is valid only when the
setting of “GMT Usage” is “On”. You can press
[←/→] keys to switch “GMT Offset” value, and the
range is “-12:00 ~ +12:00”, increase each half hour
progressively.
3.Summer: You can press [←/→] to control
Summer time on or off.
4.Date and Time: items are valid only when the
setting of “GMT Usage” is “Off”. You can press
[←/→] keys to move highlight and use number
keys to input directly.
If the current channel provides the correct time
information, you will see the current time while
you enter “Time” menu. If the channel doesn’t
provide time information, you have to
input the
date and time information manually.
5.Time Display: This item can control time display
on or off on front panel display when full screen
play.
6.Press [EXIT] key to draw back from “Time
Setting” menu.
12.4. Timer
When you enter to “Timer” menu, you will see
the screen like below: