Need help?Do you have a question about the Oracle Quad Port 10GBase-T and is the answer not in the manual?
General| Product Name | Oracle Quad Port 10GBase-T |
|---|---|
| Category | PCI Card |
| Ports | 4 |
| Port Type | 10GBase-T |
| Data Rate | 10 Gbps |
| Connector Type | RJ-45 |
| Maximum Cable Length | 100 meters |
| Form Factor | Low Profile |
| Compliance | IEEE 802.3an, IEEE 802.3az |
| Operating Temperature | 0°C to 55°C |
| Storage Temperature | -40°C to 70°C |
| Humidity | 5% to 95% non-condensing |
| Interface Type | PCI Express |
Details the steps for installing the adapter on Oracle Solaris.
Specifies the necessary hardware and software prerequisites for the adapter.
Steps to download and install the driver for Linux.
Steps to download and install the driver for Windows.
Step-by-step instructions for physically installing the adapter into a server.
Procedures to verify correct adapter installation on Oracle SPARC servers.
Procedures to verify correct adapter installation on Oracle Solaris x86 servers.
Procedures to verify correct adapter installation on Linux systems.
Procedures to verify correct adapter installation on Windows systems.
Steps to upgrade the adapter's firmware.
Procedures to verify the successful firmware upgrade.
Troubleshoot issues where the device link is not detected in Oracle Solaris.
Steps to recover from a port hang condition on Oracle Solaris.
Diagnose and resolve slow network performance issues in Oracle Solaris.
Troubleshoot link issues after back-to-back cable connections.
Resolve issues with MTU settings not applying correctly in Oracle Solaris.
To Next Page