Oracle Quad Port 10GBase-T User Manual

Cable Cautions
The Oracle Quad Port 10GBase-T Adapter is a 4x10G adapter, and supports twisted-pair copper
cabling.
4x10GbE Mode Part Number
Oracle Quad Port 10GBase-T
Adapter
■ 7111182, factory installed
■ 7111181, Xoption
Related Information
■
“Cable Cautions” on page 38
■
“Install the Adapter” on page 40
■
“Verify the Adapter Installation (Oracle SPARC)” on page 41
■
“Verify the Adapter Installation (Oracle Solaris x86)” on page 43
■
“Verify the Adapter Installation (Linux)” on page 44
■
“Verify the Adapter Installation (Windows)” on page 45
Cable Cautions
To prevent data cable damage, you must follow these cautions.
Do not uncoil the cable, as
a kink might occur. Hold
the coil closed as you unroll
the cable, pausing to allow
the cable to relax as it is
unrolled.
Do not step on the cable or
connectors. Plan cable paths
away from foot traffic or
rolling loads.
Do not pull the cable out of
the shipping box, through
any opening, or around any
corners. Unroll the cable as
you lay it down and move it
through turns.
Do not bend the cables to a
radius tighter than 85 mm
(3.4 inches). Ensure that
cable turns are as wide as
possible.
38 Oracle Quad Port 10GBase-T Adapter User's Guide • June 2019

Oracle Quad Port 10GBase-T Specifications

General

Brand	Oracle
Model	Quad Port 10GBase-T
Category	PCI Card
Language	English