Oracle Quad Port 10GBase-T User Manual

Configuring Driver Parameters
The i40e device driver controls the adapter's interfaces. You can manually set the i40e device
driver parameters to customize each device in the server.
These topics describe how to configure driver parameters:
Description Links
Configure driver parameters in the
Oracle Solaris OS.
“Set Driver Parameters (Oracle Solaris)” on page 56
“Driver Parameters (Oracle Solaris)” on page 57
Configure driver parameters in Linux. “Set Driver Parameters (Linux)” on page 58
“Driver Parameters (Linux)” on page 59
Related Information
■
“Understanding the Installation Process” on page 11
■
“Understanding the Adapter” on page 15
■
“Confirming Specifications and Requirements” on page 21
■
“Updating Software” on page 25
■
“Installing the Driver” on page 27
■
“Installing the Adapter” on page 37
■
“Configuring the Network” on page 47
■
“Configuring Jumbo Frames” on page 61
■
“Configuring a Link Aggregation” on page 65
■
“Configuring VLANs and VXLANs” on page 69
■
“Removing the Driver” on page 75
■
“Troubleshooting the Adapter (Oracle Solaris)” on page 83
Configuring Driver Parameters 55

Oracle Quad Port 10GBase-T Specifications

General

Brand	Oracle
Model	Quad Port 10GBase-T
Category	PCI Card
Language	English