Verify the Adapter Installation (Oracle Solaris x86)
pciexclass,020000
pciexclass,0200
address-bits 00000030
max-frame-size 00002400
network-interface-type ethernet
device_type network
name network
fcode-rom-offset 00059c00
vf-stride 00000001
first-vf-offset 00000010
total-vfs 00000020
initial-vfs 00000020
#vfs 00000020
port-type PCIE-Endpoint
interrupts 00000001
cache-line-size 00000010
class-code 00020000
subsystem-id 00007b1c
subsystem-vendor-id 0000108e
revision-id 00000002
device-id 00001589
vendor-id 00008086
{0} ok
If you do not see the device listed, check that the adapter is properly seated. If necessary,
reinstall the adapter.
c.
Type:
ok device-end
Related Information
■
“Adapter Description” on page 37
■
“Cable Cautions” on page 38
■
“Install the Adapter” on page 40
■
“Verify the Adapter Installation (Oracle Solaris x86)” on page 43
■
“Verify the Adapter Installation (Linux)” on page 44
■
“Verify the Adapter Installation (Windows)” on page 45
Verify the Adapter Installation (Oracle Solaris x86)
1.
Power on the server and then boot the server.
Installing the Adapter 43
To Next Page
Loading...
General