Configuring the Network
These topics describe how to configure the network for the adapter.
Description Links
Configure the network for an Oracle
Solaris server.
“Configure the Network Interface (Oracle Solaris)” on page 48
Boot over the network. “Boot Options” on page 48
“Boot Over the Network (PXE)” on page 49
“Boot Over a 10GbE Network (Oracle Solaris x86/x64 and
Linux)” on page 49
Install the Oracle Solaris OS over the
network.
“Install Oracle Solaris 11 Over a Network (Oracle
SPARC)” on page 51
Related Information
■
“Understanding the Installation Process” on page 11
■
“Understanding the Adapter” on page 15
■
“Confirming Specifications and Requirements” on page 21
■
“Updating Software” on page 25
■
“Installing the Driver” on page 27
■
“Installing the Adapter” on page 37
■
“Configuring Driver Parameters” on page 55
■
“Configuring Jumbo Frames” on page 61
■
“Configuring a Link Aggregation” on page 65
■
“Configuring VLANs and VXLANs” on page 69
■
“Removing the Driver” on page 75
■
“Troubleshooting the Adapter (Oracle Solaris)” on page 83
Configuring the Network 47
To Next Page
Loading...
General