Oracle Quad Port 10GBase-T User Manual

Verify the Adapter Installation (Oracle SPARC)
a) /niu@480/network@0
b) /pci@400/pci@2/pci@0/pci@c/network@0,3
c) /pci@400/pci@2/pci@0/pci@c/network@0,2
d) /pci@400/pci@2/pci@0/pci@c/network@0,1
e) /pci@400/pci@2/pci@0/pci@c/network@0
f) /pci@400/pci@2/pci@0/pci@a/network@0,1
g) /pci@400/pci@2/pci@0/pci@a/network@0
q) NO SELECTION
Enter Selection, q to quit: q
4.
Check the .properties output for each device.
Note - Checking the .properties output for each device is the surest way to identify the
device.
These examples assume that /pci@400/pci@2/pci@0/pci@c/network@0 is a port on the adapter.
a.
Change to the device directory.
ok cd /pci@400/pci@2/pci@0/pci@c/network@0
b.
Display properties for the device.
ok .properties
The output should be similar to this:
vf-assigned-addresses c3050000 00000041 01010000 00000000 00010000
c3050003 00000041 01210000 00000000 00004000
assigned-addresses c3050010 00000041 00000000 00000000 01000000
c305001c 00000041 01000000 00000000 00008000
82050030 00000000 00200000 00000000 00080000
vf-reg 43050000 00000000 00000000 00000000 00010000
43050003 00000000 00000000 00000000 00004000
reg 00050000 00000000 00000000 00000000 00000000
43050010 00000000 00000000 00000000 01000000
4305001c 00000000 00000000 00000000 00008000
02050030 00000000 00000000 00000000 00080000
local-mac-address 3c fd fe 50 00 f0
version Oracle Quad Port 10GBase-T Adapter FCode 3.7 10/18/2016
board-model 7096675
model 7111181/7111182
compatible pciex8086,1589.108e.7b1c.1
pciex8086,1589.108e.7b1c
pciex8086,1589.1
pciex8086,1589
42 Oracle Quad Port 10GBase-T Adapter User's Guide • June 2019

Oracle Quad Port 10GBase-T Specifications

General

Brand	Oracle
Model	Quad Port 10GBase-T
Category	PCI Card
Language	English