Electrical Specifications
■
“Handling Precautions” on page 21
■
“Installing the Server” on page 23
■
“Electrical Specifications” on page 16
■
“Environmental Specifications” on page 17
■
“Airflow Precautions” on page 18
Electrical Specifications
Description Value Notes
Voltage 200 to 240 VAC
Frequency 50 to 60 Hz
Maximum operating input current at 200 VAC (per cord)
†
10.75A
‡
Maximum operating input power at 200 VAC 2475W
Maximum standby power 45W
Idle input power (maximum configuration)
*
1150W
Idle input power (minimum configuration)
•
945W
Peak AC power (maximum configuration)
*
2215W Conforms to SpecJBB.
Peak AC power (minimum configuration)
•
1725W Conforms to SpecJBB.
Maximum heat dissipation 8447 BTU/hr
8912 KJ/hr
†
The maximum operating input current values are based on P / (V *0.95), where P = max. operating input power, V= input voltage. Example: 1060W / (220 * 0.95)
= 5.1A You can use this equation to calculate your maximum operating current at your input voltage.
‡
Actual amperage draw may exceed rating by no more than 10%.
*
Maximum server configuration specification under nominal temperature and voltage conditions (two 4.133-GHz M7 processors with thirty two 32-GB DDR4
DIMMs, 6 SSD drives, and 8 PCIe cards).
•
Minimum server configuration specification under nominal temperature and voltage conditions (two 4.133-GHz M7 processors with sixteen 16-GB DDR4 DIMMs,
no drives, and no PCIe cards).
For information on power specifications, use the power calculator at:
http://www.oracle.com/us/products/servers-storage/sun-power-calculators
Related Information
■
“Powering On the Server for the First Time” on page 53
■
“Physical Specifications” on page 15
■
“Environmental Specifications” on page 17
■
“Airflow Precautions” on page 18
16 SPARC T7-2 Server Installation Guide • March 2016
To Next Page
Loading...
Need help?
General