Oracle SPARC T7-2 Installation Guide

Identifying Ports
■
SP NET MGT port
■
At least one system on-board Ethernet network port
■
Power cables to the power supply inlet ports
Related Information
■
“Connect the SER MGT Cable” on page 48
■
“Connect the NET MGT Cable” on page 49
■
“Connect Ethernet Network Cables” on page 50
■
“Prepare the Power Cords” on page 53
Identifying Ports
These topics provide the pin descriptions of the ports.
■
“Rear Panel Components (Installation)” on page 13
■
“USB Ports” on page 42
■
“SER MGT Port” on page 43
■
“NET MGT Port” on page 45
■
“Gigabit Ethernet Ports” on page 46
■
“VGA Port” on page 47
Related Information
■
“Server Overview” on page 10
■
“Front Panel Components (Installation)” on page 12
■
“Rear Panel Components (Installation)” on page 13
■
“Cabling Requirements” on page 41
USB Ports
Two USB 3.0 ports can be accessed from the rear of the server and two USB 2.0 ports from the
front. See the location of the USB ports at “Front Panel Components (Installation)” on page 12
and “Rear Panel Components (Installation)” on page 13. The USB ports support hot-plugging.
You can connect and disconnect USB cables and peripheral devices while the server is running,
without affecting server operations.
Each USB port supplies 5V output at 500 mA.
42 SPARC T7-2 Server Installation Guide • March 2016

Oracle SPARC T7-2 Specifications

General

Brand	Oracle
Model	SPARC T7-2
Category	Server
Language	English