Oracle SPARC T7-2 Installation Guide

Assigning a Static IP Address to the SP
Parameter Description
Time Zone (Continent) Select your continent.
Time Zone (Country or Region) Select your country or region.
Time Zone Select the time zone.
Date and Time Accept the default date and time, or change the values.
root Password
Type the root password twice. This password is for the superuser account for the Oracle Solaris OS
on this server. This password is not the SP password.
Related Information
■
Oracle Solaris OS documentation
■
“Configure the Preinstalled OS” on page 58
■
“Reach a State to Install a Fresh OS (Oracle ILOM CLI)” on page 59
■
“Reach a State to Install a Fresh OS (Oracle ILOM Web Interface)” on page 61
Assigning a Static IP Address to the SP
If your network does not use DHCP, the NET MGT port is not operational until you configure
network settings for the service processor.
Note - If you are unable to use DHCP on your network, you must connect to the Oracle ILOM
on the SP using the SER MGT port to configure the NET MGT port for your network. See
“Assign a Static IP Address to the NET MGT Port” on page 66.
■
“Log In to the SP (SER MGT Port)” on page 64
Related Information
■
“Oracle ILOM System Console” on page 57
■
“Log In to the SP (SER MGT Port)” on page 64
■
“Oracle Solaris OS Configuration Parameters” on page 63
■
“Assign a Static IP Address to the NET MGT Port” on page 66
Log In to the SP (SER MGT Port)
After the SP boots, access the Oracle ILOM CLI to configure and manage the server. The
Oracle ILOM CLI prompt (->) is displayed the first time the SP is booted. The default
64 SPARC T7-2 Server Installation Guide • March 2016

Oracle SPARC T7-2 Specifications

General

Brand	Oracle
Model	SPARC T7-2
Category	Server
Language	English