Tools Needed for Installation
Related Information
■
“Handling Precautions” on page 21
Tools Needed for Installation
■
No. 2 Phillips screwdriver
■
ESD mat and grounding strap
In addition, you must provide a system console device, such as one of the following:
■
ASCII terminal
■
Workstation
■
Terminal server
■
Patch panel connected to a terminal server
Related Information
■
“Handling Precautions” on page 21
■
“ESD Precautions” on page 21
■
Server Service
22 SPARC T7-2 Server Installation Guide • March 2016
To Next Page
Loading...
