Connect Other Data Cables
1.
Connect a Category 5 (or better) cable from your network switch or hub to
Ethernet Port 0 (NET0) on the rear of the chassis.
2.
Connect Category 5 (or better) cables from your network switch or hub to the
remaining Ethernet ports (NET1, NET2, NET3), as needed.
Related Information
■
Server Administration
■
“Powering On the Server for the First Time” on page 53
Connect Other Data Cables
If your server configuration includes optional PCIe cards, connect the
appropriate I/O cables to their connectors.
Refer to the PCIe card documentation for specific instructions.
Related Information
■
Documentation for the PCIe card
■
Server Service
Connecting the Server Cables 51
To Next Page
Loading...
