Log In to the SP (SER MGT Port)
configuration provides an Oracle ILOM CLI root user account. The default root password is
changeme. Change the password using the Oracle ILOM CLI password command.
Note - The server is provided with a default Administrator account (root) and a default
password (changeme) to enable first-time login and access to Oracle ILOM. To build a secure
environment, you must change the default password of the default Administrator account as
soon as possible after your initial login to Oracle ILOM. If you find this default Administrator
account has already been changed, contact your system administrator to obtain an Oracle ILOM
user account with Administrator privileges.
1.
If this is the first time the server has been powered on, use the password
command to change the root password.
hostname login: root
Password:
Last login: Mon Feb 18 16:53:14 GMT 2013 on ttyS0
Detecting screen size; please wait...done
Oracle(R) Integrated Lights Out Manager
Version 3.2.1.2 rxxxxx
Copyright (c) 2013, Oracle and/or its affiliates. All rights reserved.
Warning: password is set to factory default.
-> set /SP/users/root password
Enter new password: ********
Enter new password again: ********
->
Note - After the root password has been set, on subsequent reboots, the Oracle ILOM CLI
login prompt is displayed.
2.
Type root for the login name, followed by your password.
...
hostname login: root
Password: password ( nothing
displayed)
Oracle(R) Integrated Lights Out Manager
Version 3.2.1.2
Copyright (c) 2013 Oracle and/or its affiliates. All rights reserved.
Powering On the Server for the First Time 65
To Next Page
Loading...
Need help?
General