The Automatic Set Up will select a complete registration for the entire instrument based on the style
that was selected. Auto Bass and Auto Chord are selected and also an Introduction plus sounds for the
Upper and Lower keyboards.
As soon as a chord is played on the lower keyboard an introduction will be played in the key based on
the chord played:
E.g. C chord key of C.
F chord key of F
Etc.
When the Automatic Set Up is selected the sounds that are being used are indicated by being
illuminated in the Upper Conductor section. Any sections that are not illuminated are also set up with
suitable sounds which can be used instead of, or as well as the sound originally selected simply by
switching on the relevant Conductor button.
The Automatic Set Up will remain On until switched Off. Therefore if a style is changed whilst playing
and the Automatic Set Up is on both the sound and tempo are likely to be changed. It is possible to
change the style while playing in the following way:
- Select the first style required.
- Switch On the Automatic Set Up
- Switch Off the Automatic Set Up
- Commence playing
- Change the style. The tempo and sounds will now remain the same.
It is also possible to use the Automatic Set Up in conjunction with the Automatic Organ.
To do so follow the following procedure:
- Select the style required
- Switch On Automatic Set Up
- Switch Off Automatic Set Up
- Switch On the Lock button located to the right hand side of the Overall Presets.
- Commence playing. The registration selected by the Automatic Set Up still remains.
- Select an Overall Preset from any of the 6 Automatic Organ sections or the Overall Presets
section. The Upper keyboard registration will change. However the accompaniments and Lower
keyboard sounds will remain the same.
It is therefore possible in this way to combine the Automatic Set Up registrations with the 96 Automatic
Organ registrations plus any registrations that may be in the Overall Presets.
The automatic set up is normally registered for people who play with their own chords and with
Autobass.
To play with single finger chords change the MFC button at the top left side of the screen to the OFC
button.
To play with Bass pedals switch off the Autobass button.
To Next Page