PROGRAMMABLE FOOTSWITCHES
The footswitches can be programmed.
- press the SET button All the programmable features of the instrument will start blinking.
- press one of the two pedal switches either to the right or left of the volume pedal and the display
will show:
FOOT SWITCH SET
L Fill 1 R = Trem
Moving the cursor with the (<) or (>) buttons you can decide if you want to change the Left or
the Right switch setting. With the (/\) and (\/) buttons it is possible to select the many
possibilities for each switch:
Fill 1 - Fill 2, Start/Stop, Variation Up, Glide, Hold, Overall Preset - (Down), Overall Preset +
(Up), Fade, Tempo - (Down), Tempo + (Up), Flutes Tremolo Select, Flutes Vibrato On/Off,
Conductor Upper Orchestra 1, Conductor Upper Orchestra 2, Conductor Special Upper,
Conductor Special Lower, Conductor Upper Flutes, Conductor Lower Flutes, Conductor Lower
Orchestra, Conductor Bass.
- to store the new configuration, simply switch off the SET button to exit the function.
To Next Page
Loading...