When you have selected the desired configuration select OK with the (/\) Data buttons.
The next page will be:
DRUM STANDARD
Level Effect OK
As soon as the above page appears on the display the DRUMS Led in the CUSTOM STYLE section
lights up. We are now about to start programming the Drum lines of the new style.
In this page is possible to select one of the available 8 DRUM KITS, the DRUM Volume Level and the
DRUM Effects.
DRUM KIT - Use the Data buttons to select one of the following Drum Kits:
Standard, Room, Power, Electronic, Modern, Jazz, Orchestra, SFX
Level - Use the Data buttons to set the volume of the Drum Kit.
DRUM setting
Level = 127 OK
Effect - When selecting the Effect the display will show the default setting:
Pan Rev Cho DRUM
64 100 0 OK
Use the Data buttons to select the Panning Value, the Reverb Value and the Chorus Value.
Select OK to go to the next page. The Display will show:
Style set DRUM 1
Main OK
By using the Data buttons it is possible now to select which part of the style that we will start
programming in DRUM Variation 1.
It is possible to program the following parts:
Intro, Ending, Fill 1, Fill 2, Main
Select OK to go to the next page. The display will show:
Main 1 120
M = n Q = off Del
In this page it is possible to program Drum pattern in the Main Style Variation 1 By using the Data
buttons it is possible to set the following
M - Metronome On/Off
Q - Quantization - This can be set as follows: 8, 8t, 16, 16t, 32, 32t, 64, off
To Next Page
Loading...