The new AUTO SET UP is now saved.
C) NAME THE AUTO SET UP
1- Move the cursor using the (<) and (>) DATA buttons and set the cursor under the first
letter. Using the (/\) and (\/) DATA buttons select the letters to write the new name of
the AUTO SET UP and confirm by pressing the ENTER/YES button..
2- If the new name already exists the display will show:
FILE EXIST
Replace it?
3 - If the file is not to be replaced press the ESCAPE/NO button
4 - If the file is to be replaced press the ENTER/YES button and the display will show:
FILE
!!SAVING!!
The new AUTO SET UP is now saved.
The display now indicates
DISK XXXkb free
[SAVE]
Press the ENTER button and select the next page using the SCROLL buttons
[SAVE]
Custom Style
Press ENTER to select the Custom style function. The display indicates:
[SAVE]
XXXXXXXX.STL
Use the SCROLL buttons select the name of the Custom Style. Press ENTER to save the selected
Custom Style setting. If the file already exists the display indicates:
FILE EXIST
Replace it?
If the file is not to be replaced press the ESCAPE button. If the number is to be replaced press ENTER.
The display will indicate:
FILE
!!SAVING!!
The display now indicates
DISK XXXkb free
[SAVE]
To Next Page
Loading...