SETTING SUSTAIN
This function allows you to adjust the sustain value of each sound in all the available sound sections.
The new configuration can be set as follow:
- press the set button all of the LED’s for the programmable sections will start blinking , then for
example, press the SUSTAIN button in the UPPER ORCHESTRA 1 section. Its Led will light
up.
- press, for example the PIANO sound button. The display will show:
UPPER 1 set sust = X
B 0 1 Gr.Piano
X is the Sustain value (the range is from 0 - no sustain - to 7- max sustain -)
B0 is the Sound Bank number where Sound 1 Grand Piano is located.
- To select the new Sustain Value use the (/\) and (\/) DATA buttons.
- it is possible to reprogram the Sustain Value of all the available sounds in all the sound sections
including the user sounds.
- simply press the SET button to exit the function.
Remember the new sustain will not be saved until stored into an overall preset.
SETTING THE OCTAVE
This function allows you to set a different Octave to each one of the available sound sections. Each
section can be moved Up or Down by 2 Octaves.
The new configuration can be set as follow:
- press and hold, for example, the OCTAVE button in the UPPER ORCHESTRA 1 section. Its
Led will start blinking.
- the display will show:
OCTAV B = -1 L = -1
U1 = -1 U2 = -1 S = -1
B indicates the BASS Section
L indicates the LOWER ORCHESTRA Section
U1 indicates the UPPER ORCHESTRA 1 Section.
U2 indicates the UPPER ORCHESTRA 2 Section.
S indicates the SPECIAL Section
At 0 (zero) value there is no Octave transposition.
- To change the Octave value, move the cursor using the (<) and (>) buttons and position it under
the values that need to be changed.
Use the (/\) and (\/) DATA buttons to change the octave. The Octave can be shifted by a
maximum of 2 octaves up or 2 octaves down (-2/+2). Each Sound Section can be assigned with
a different Octave Value.
After about 5 seconds of inactivity the octave button will cease blinking.
Remember the new OCTAVE setting will not be saved unless stored into an overall preset.
To Next Page
Loading...