Orla GT5000 - Automatic Save of the Overall Presets; Change the Number of the Overall Preset; Name the Overall Preset

49
SAVE
Select the next page with the (<) and (>) DATA buttons
DISK XXXkb free
[SAVE]
Press the ENTER button to select the SAVE function and the display now indicates the next feature
that is:
[SAVE]
OVERALL PRESETS
Press ENTER button to select the Overall Preset function and the display indicates the first Overall
Preset number available.
SAVE
XXXXXXXX.OVP
There are three ways to SAVE the OVERALL PRESET
A) AUTOMATIC SAVE OF THE OVERALL PRESETS
- Press ENTER to save the Overall Preset.
2 - The internal computer will automatically save the song giving a progressive name:
OVERP_01.OVP
OVERP_02.OVP
OVERP_XX.OVP
B) CHANGE THE NUMBER OF THE OVERALL PRESET
1- Move the cursor using the (<) and (>) DATA buttons and set the cursor under the
position of the number. Use the (/\) and (\/) DATA buttons to change the number.
2- Press ENTER to save the new Overall Preset number.
3- If this new number already exists the display will show:
FILE EXIST
Replace it?
4- To retain the original file press the ESCAPE/NO button
5- To replace the file press the ENTER/YES button and the display will show:
FILE
!!SAVING!!
The new Overall Preset is now saved.
C) NAME THE OVERALL PRESET
1- Move the cursor using the (<) and (>) DATA buttons and set the cursor under the first
letter. Using the (/\) and (\/) DATA buttons select the letters to write the new name of
the Overall Preset and confirm by pressing the ENTER/YES button..
2- If the new name already exists the display will show: