PROGRAMMABLE FX BUTTONS
1. Press “SET” button (various red LED lights flash).
2. Press “FX” button (FX1 - FX4 whichever one you wish to over-write).
Red LED above selected FX button now flashes.
Screen will read:
3. Press the down \/ button (located to the right of the screen under “TEMPO/DATA”) to select
soundbank (SFX, ORCHESTR, BRUSH, JAZZ, TR808, ELECTRIC, POWER, ROOM and
STANDARD)
Screen will now read:
4. Using the top keyboard - select the desired sound/effect.
5. Press “SET” button.
The sound is now stored in the selected FX button, however when you select a preset or switch the
organ off the FX button will revert to the original preset sound.
To permanently store the new sound/effect it needs to be stored into an overall preset:
The FX button will also store the dynamic value of the sound played on the keyboard.
It is possible to store different Drum/Effect sounds to each one of the 16 Overall Presets and to each
one of the 90 Auto Set-Ups available.
O.M.C. - Orla Magic Chord
Whenever you play a chord with the left hand, this function adds a complete chord to the melody line
played with the right hand. It is intended to convert a single note melody into a full chord
There are three different types of OMC chords
OPEN - gives a “spread” harmony, great for theatre organ styles
CLOSED - is a full rich harmony in closed chord configuration.
OCTAVE - depressing the two OMC buttons together takes the effect up one octave
Remember to play the melody on the upper part of the keyboard when using the OMC.
LOCK
The LOCK feature allows you to use the various OVERALL PRESETS using always the last selected
rhythm and lower keyboard settings.
If the LOCK button is off, it is possible to change complete registrations, including the rhythm by
changing the OVERALL PRESETS.
If the LOCK button is On, the last selected rhythm and lower keyboard settings will remain and the
upper keyboard sound will change as per the overall presets.
To Next Page
Loading...