OCTAVE AND SOUND CHANGE
Sometimes is also useful to have the possibility to change the Octave of a specific Track or to
completely change the instrument of a specific Track.
1 - Press PLAY button.
2 - Press TRACK SELECT
3 - The display will show:
on +0db 120
Track 1 1.1
Press the (<) and (>) DATA button at the same time and the display indicates
Track 1 Oc = - -
B -- ? - - - - - - - -
4 - Using the (<) and (>) DATA buttons move the cursor and by using the (/\) and (\/) SCROLL
buttons select the desired values.
5 - Moving the cursor the with (<) and (>) DATA buttons under the track location it will allow you
to select the Track number (1/16).
6 - By moving the cursor under the Oc it will be possible to select the new Octave (-2/+2).
7 - Moving the cursor under the B (Bank) location it will allow you to select the Sound Bank
number (1/32).
8 - Moving the cursor under the ? -------- location it will allow you to select the Sound Number
(see Sound List).
To save the changes onto a separate file that will be recalled automatically every time the original file is
selected. Proceed as follows:
1 - Press PLAY/STOP to stop the song.
2 - Press the RECORD button and hold it.
3 - Press the TRACK SELECT button at the same time .
4 - The display will show:
SAVE Track Set
Confirm?
5 - To confirm press the ENTER button and the display will indicate
Track Set
!!Saving!!
While the song is running the original file or the new edited file can be played.
1 - Press the DISK button and hold it.
2 - Press TRACK SELECT. In the display ## appears to identify the edited file. If the display
does not show ## the original file is selected.
To Next Page
Loading...