GROUNDING INSTRUCTIONS
This product must be grounded (earthed). If should malfunction or breakdown, grounding provides a
path of least resistance for electric current to reduce the risk of electric shock This product is equipped
with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged
into an appropriate outlet that is properly installed and grounded in accordance with the local codes and
regulations
DANGER
Do not modify the plug provided with the product - if it will not fit - have a proper outlet installed by a
qualified electrician
DATA HANDLING
The information contained in the internal memory may sometimes be lost due to incorrect user action.
Make sure to save important data into a floppy disk. ORLA will not be responsible for damages caused
by data loss.
MULTI INFORMATION DISPLAY
The messages contained in the Multi Information Display may not always match the display pages They
are merely examples of the many features of the product
DISCLAIMER
The information contained in this manual has been very carefully revised. Due to the constant effort to
improve the product, the product specifications might differ to those in the manual. The specifications
are subject to modification without prior notice.
TAKING CARE OF YOUR INSTRUMENT
Your keyboard is a fine instrument and deserves careful treatment. Follow carefully the next few points to keep
it at it’s best for many years.
- Never open the case and touch the internal circuits.
- Always switch the power 0ff after use.
- Clean with a cloth or a damp sponge. If the dirt is particularly persistent, use a neutral detergent to
remove it. Never use solvents or alcohol.
- Do not place your instrument near electric motors, neon or fluorescent lamps as these may generate
disturbances
- In most cases you just need to change the position of the instrument to avoid interference
- Keep your instrument away from dusty environments, high humidity, and high temperatures.
- Make sure that your local AC mains voltage matches the voltage indicated on the name plate in the back
of the instrument. Connect the power cord to the power supply.
- Do not use electrical appliances, neon lights or variable lighting system on the same AC Mains outlet.
- Before turning on the instrument, make sure that your amplifiers and speaker system are off.
- Computer controlled instruments can be interrupted by spikes, surges and dropouts on the power line. If
your instrument stops working because of a power line disturbance, switch it off for a few seconds and
then switch it back on.
- Never disconnect the power cable without turning off the power switch.
To Next Page
Loading...