ADVANCED FEATURES.
OVERALL PRESETS
Overall Presets are combinations of sounds and features that have been set up beforehand at the factory.
The 8 numbered buttons in 2 banks (A and B) for a total of 16 Overall Presets, provide registrations
that will suit many music styles. Overall Presets can be easily modified as follows
- set up the desired sound registration including Organ User sounds, User sounds Sustain times,
Octaves, Rhythm and tempo settings etc.
- press the SET button. All the programmable features of the instrument will start blinking.
- press the Overall Preset button at the bottom of the automatic organ section.
Its Led will stop blinking.
- select the desired overall preset number
- select the bank required A/B.
- switch off the set button
- the registration is now stored.
POLY/MONO
By selecting the POLY/MONO button, the ORCHESTRA 2 section can be played in
monophonic or polyphonic mode combining its sounds with the other sections.
When in mono mode the ORCHESTRA 2 section can be set to respond in two ways:
a - Highest note
b - Temporal
- press the SET button. All the programmable features of the instrument will start
blinking
- press the POLY/MONO button in the ORCHESTRA 2 section. It’s Led will start
blinking and the display will show:
UPPER 2 SETTING
MONO right note
- In this setting the ORCHESTRA 2 sound will always correspond to the highest note
played.
- To change the ORCHESTRA 2 SETTING use the (/\) and (\/) DATA buttons and the
display will show:
UPPER 2 SETTING
MONO temporal
- In this setting the sound will always correspond to the last note played.
- to store the new ORCHESTRA 2 setting, simply press the SET button to exit the
function.
To Next Page