Del - Select it with the (/\) data button to delete your programming
Before you actually start your new style verify the Drum set configuration on the keyboard and identify
the position on the various keys of the drum sounds you are going to use for programming.
Select the Metronome feature ON to help your programming and press the Start button in the
RHYTHM ORCHESTRATION section to commence programming the new Drum pattern for the Main
style Variation 1
You can program one instrument at a time while the internal computer is looping the style or you can
also add more than one instrument at a time.
If you make a mistake in programming it is possible to delete the wrong instruments by using the
Delete feature This allows you to delete drum sounds or drum lines while programming.
How to delete a single hit: Select the Del function on display using (<)or (>) buttons.
Press the (/\) button to activate the Delete function and, with the style
running, at the same time push the corresponding instrument key which
you wish to cancel at the moment it plays
Delete all hits from the same instrument.
Select the Del function on display using (<)or (>) buttons.
Press the (/\) or (\/) button to activate the Del function and, with the
rhythm stopped, at the same press time the corresponding instrument key
which you wish to cancel.
Delete the full drum pattern: Select the Del function on display using (<)or (>) buttons. Press the (/\) or
(\/) button to activate the Del function and with the rhythm stopped push
the AUTO START button
Now that we have programmed Drum Variation 1 it is possible to program Drum Variation 2. Press the
DRUM button in the CUSTOM STYLE section and the display will show:
Style Set DRUM 1
Main OK
Press a second time the DRUM button and the display will show:
Style Set DRUM 2
Main OK
Proceeding as shown for Variation 1 it is now possible to start programming Variation 2
NOTE - It is not possible to have a completely Drum part for Variation 2 and 3 but it is possible
to add more Drum sounds to embellish the Drum part.
Follow the same instructions for programming Variation 3.
Now press the BASS button in the CUSTOM STYLE section and the display shows:
STYLE set BASS
Main Major OK
To Next Page
Loading...