Orla GT5000 - To Load Styles and Registrations from Disk

33
TO LOAD STYLES AND REGISTRATIONS FROM DISK
1. Insert GT Style Registration Disk into organ (label side up).
2. Press “DISK” button. (Centre second row of buttons below screen)
Screen will read :- DIRECTORY.
3. Press > Data button to right of screen.
Screen will read :- SAVE
4. Press > Data button to right of screen.
Screen will read :- LOAD
5. Press Enter/Yes button underneath the screen .( Second button second row)
Screen will read :- Overall Presets
6. Press Enter/Yes button underneath the screen .( Second button second row)
Screen will read :- XXXXXX .OVP
7. Press Enter/Yes button underneath the screen .( Second button second row)
Screen will read !!! LOADING !!! , then revert to ..LOAD...
8. Press Enter/Yes button underneath the screen .( Second button second row)
Screen will read :- Overall Presets
9. Press upward arrow scroll button 3 TIMES ( 1st row second button under screen)
Screen will read :- Style Block
10. Press Enter/Yes button underneath the screen .( Second button second row)
Screen will read :- XXXXX .BLK
11. Press Enter/Yes button underneath the screen .( Second button second row)
Screen will read !!! LOADING !!! , then revert to ..LOAD...
12. Switch off disk button.
There will now be new styles in the User Style user button and new sounds in the overall presets.