NOTE: The midi Clock can also be set Off. This will not accept the Start command code if
received.
FISA MODE When using this setting the keyboard will only work using 3 midi
channels for note recognition:
Ch 1 for the Upper Keyboard
Ch 2 for the Lower Keyboard
Ch 3 for the Pedalboard
MASTER MODE When using this setting the keyboard will communicate in all the 16 midi
channels, if set, only with corresponding Midi Channels.
PIANO MODE It will be possible with this setting to drive the Accompaniment and the Melody
parts of the GT5000 with only 1 midi channel. Typical application is a Digital
Piano with no split point.
The Split point will be provided by the organ:
- press the SET button. All the programmable features of the instrument
will start blinking.
- press the Midi button 5 times.
- Its Led will start blinking and the display
PIANO MODE SET
Split = A#3
To change or set the Split Point use the (/\) and (\/) buttons to select the
desired note or simply press the desired note on the keyboard.
- to store the new Split Point setting, simply press the SET button to exit
the function.
When in PIANO MODE it is also possible to select the FULL
KEYBOARD MODE that will allow to play chords in the full keyboard
using the MELODY section of the instrument in the full
keyboard.
PIANO MODE SET
Split = A#3
When in the above page select the FULL KEYBOARD MODE using the (/\) and
(/\) DATA buttons and the display will show:
PIANO MODE SET
Full Keyboard
To Next Page
Loading...