By pressing the midi button a second time, the display shows:
IN Ch PC CC
Rt_1 1 on on
In this page it is possible to determine the Midi In channel number for each section. It is also possible
to set the Program Change On/Off and the Control Change On/Off. The last page of Midi In is the
GENERAL CONTROL (CTRL) Channel page.
IN Ch PC CC
Ctrl 16 on on
See the list of the Control available in the next page.
Here find the list of the controls available in GENERAL CONTROL channel:
Bx 1F yy - Bx Channel
- 1F Control Change (default ch.16)
- yy Value
; yy
Key Start ; 0
Variation 1 ; 1
Variation 2 ; 2
Variation 3 ; 3
Fill 1 ; 4
Fill 2 ; 5
Intro/Ending ; 6
Memory ; 7
Auto Bass ; 8
Auto Accomp. ; 9
Conductor - Bass ; 10
Conductor - Lower Orch ; 11
Conductor - Lower Special ; 12
Conductor - Upper Orch.1 ; 13
Conductor - Upper Special ; 14
Conductor - Upper Orch.2 ; 15
Conductor - Upper Flutes ; 16
Conductor - Lower Flutes ; 29
Play ; 17
Down (\/) ; 18
Up (/\) ; 19
Fade ; 20
Minus (-) ; 21
Plus (+) ; 22
NOTE: If code nr. 11 (Expression) is sent to GENERAL CONTROL channel this will work as
Master Volume.
NOTE: It is possible to select OVERALL PRESETS and AUTO SET-UP using GENERAL
CONTROL channel:
To Next Page
Loading...