PROGRAMMING THE CHAIN
To group the songs in a CHAIN format (continuous format).
1 - Press ENTER button (the ESCAPE/NO button is On). The display indicate
CHAIN Settino
XXXXXXXX.MID 1
The number identifies the progressive number of the song in the chain.
2- Using the SCROLL buttons select the first song to group in the Chain.
3 - Press ENTER to confirm.
4 - Using the SCROLL buttons select the second song to group in the Chain.
5 - Press ENTER to confirm. Repeat this procedure with all the songs to be grouped into the chain.
6- Press ESCAPE to store the chain setting and the display will indicate
SAVE
CHAIN 01.CHN
The are 3 ways to indicate the name of the CHAIN:
A) AUTOMATIC SAVE OF THE CHAIN
1- Press ENTER to save the song.
2 - The internal computer will automatically save the song giving a progressive name:
CHAIN_01.CHN
CHAIN_02.CHN
CHAIN_XX.CHN
B) CHANGE THE NUMBER OF THE CHAIN
1- Move the cursor using the (<) and (>) DATA buttons and set the cursor under the
position of the number. Use the (/\) and (\/) DATA buttons to change the number.
2- Press ENTER to save the new song number.
3 - If this new number already exists the display will show:
FILE EXIST
Replace it?
4- To retain the original file press the ESCAPE/NO button
5 - To replace the file press the ENTER/YES button and the display will show:
FILE
!!SAVING!!
The new CHAIN is now saved.
C) NAME THE SONG
1- Move the cursor using the (<) and (>) DATA buttons and set the cursor under the first letter.
Using the (/\) and (\/) DATA buttons select the letters to write the new name of the song and
confirm by pressing the ENTER/YES button..
2 - If the new name already exists the display will show:
FILE EXIST
To Next Page
Loading...