Orolia VersaSync User Manual

made to NTP configurations will also take effect after VersaSync is either rebooted or
power-cycled.
You can, however, also disable or enable the VersaSync NTP Service manually, e.g. with
NTP Autokey.
To disable and enable your NTP Service:
1.
Navigate to MANAGEMENT > NETWORK: NTP Setup.
2.
In the NTP Services panel, set the ON/OFF toggle switch to OFF.
3.
A notification window will confirm the status change.
4.
In the NTP Services panel, set the ON/OFF toggle switch to ON again.
Changes made will now take effect and NTP operation will be restored shortly after this
operation is performed.
2.8.9.4 Viewing NTP Clients
To view the NTP clients being served by VersaSync:
1.
Navigate to MANAGEMENT> NETWORK: NTP Setup.
2.
In the NTP Actions panel, click View NTP Clients:
3.
The NTP Clients window will display, showing a table of the clients that are syn-
chronizing to VersaSync via NTP:
102
CHAPTER 2 • VersaSync User Manual Rev. 7.0
2.8 Configuring Network Settings

Orolia VersaSync Specifications

General

Brand	Orolia
Model	VersaSync
Category	Server
Language	English