Version
Restriction Flags
Avg Interval
Last Interval
Restore Default NTP Configuration: Click here to restore VersaSync’s NTP set-
tings to the factory default. Any settings you have created previously will be lost.
See "Restoring the Default NTP Configuration" on page103.
The NTP Services panel
… is the second panel on the left-hand side of the NTP screen. It has two switches:
NTP ON/OFF: This switch enables and disables NTP. See "Dis-/Enabling NTP"
below.
Note: When applying any changes NTP will usually restart auto-
matically. Use this switch only to force a restart.
Expert Mode: Turning this switch ON enables direct access to the NTP.conf file,
thus bypassing the VersaSync Web UI. [Default =OFF] See "NTP Expert Mode" on
page125.
Note: Spectracom Tech Support does not support the editing of the
NTP configuration files in Expert Mode. For additional information on
editing the NTP.conf file, please refer to http://www.ntp.org.
Other NTP Services that can be configured via the NTP Services panel by clicking the
GEAR icon are:
Stratum 1 (see "NTP Reference Configuration" on page105)
The NTP Status Summary panel
… provides a real-time overview of your key NTP network parameters. For more inform-
ation, see "NTP Status Monitoring" on page237.
2.8.9.3 Dis-/Enabling NTP
If you applied NTP configuration changes e.g., added a new NTP Server, VersaSync usually
will stop and re-start the NTP Service automatically once you clicked Submit. Changes
2.8 Configuring Network Settings
CHAPTER 2 • VersaSync User Manual Rev. 7.0
101
To Next Page
Loading...