4.6.2.6 Clearing All Logs
Note: Authentication logs and NTP logs cannot be cleared.
All local logs in the home/spectracom directory will be logged. Other logs e.g., located on
Syslog Servers, must be maintained by the user.
To clear all locally stored log files:
1.
Navigate to MANAGEMENT > OTHER: Log Configuration.
2.
In the Actions panel, click Clear All Logs:
3.
In the grey confirmation window, click OK.
4.7 Updates and Licenses
4.7.1 Software Updates
Orolia periodically releases new versions of software for VersaSync. These updates
1
are
offered for free and made available for download from the Orolia website. If you register
your product, you will be notified of software updates.
To carry out a software update:
1.
In the WebUI, navigate to Tools > Upgrade/Backup.
2.
Determine your System software version in the System Configuration panel: Pro-
ceed to the next step if it is lower than the software version you plan on installing.
3.
Free up disk space, if needed:
Under Tools > Upgrade/Backup > Disk Status, check Percent Used: If the num-
ber is greater than 70%, free up disk space.
(NOTE: If required, existing logs can be archived; for details see "Saving and
1
The terms update and upgrade are both used throughout Orolia technical literature, as software releases may include
fixes and enhancements, as well as new features.
252
CHAPTER 4 • VersaSync User Manual Rev. 7.0
4.7 Updates and Licenses
To Next Page
Loading...
Need help?
General