Orolia VersaSync User Manual

To access the GNSS Receiver settings:
1.
Navigate to INTERFACES > REFERENCES: GNSS 0.
Note: Typically, there will be only one GNSS reference, numbered
"0".
2.
The GNSS 0 status window will open. To open the configuration window, click Edit
in the bottom-left corner.
OR:
1.
Navigate to INTERFACES > REFERENCES: GNSS Reference.
2.
Click on the INFO button, or the GEAR button to configure the GNSS settings, or
review GNSS reference status information.
3.3.3.1 Reviewing the GNSS Reference Status
To view the current status of your GNSS reference:
172
CHAPTER 3 • VersaSync User Manual Rev. 7.0
3.3 Managing References

Orolia VersaSync Specifications

General

Brand	Orolia
Model	VersaSync
Category	Server
Language	English