ZZ The magnitude of the offset to UTC in units of half-hours.
If ZZ = 0, then z = +
m Time mode character, is one of:
G = GPS
L = Local
U = UTC
T = TAI
CC The current leap seconds
FF The future leap seconds, which will show a leap second pending
24hours in advance
CR Carriage Return
LF Line Feed
5.3.18 Event Broadcast Time Code Formats
The following ASCII-based time code formats are available:
5.3.18.1 Event Broadcast Format 0
E x a m p l e m e s s a g e :
SSSSSSSSSS.XXXXXXXXX<CR><LF>
Where:
SSSSSSSSSS 10-digit Seconds Time (references from
January 1
st
, 1970)
. Decimal Point Separator
XXXXXXXXX 9-digit Sub-Seconds Time (5 ns resolution)
CR Carriage Return
LF Line Feed
VersaSync User Manual 327
APPENDIX
To Next Page
Loading...