Note: In the event that the update failed, see "Troubleshooting Software
Update" on page270.
4.7.2 Applying a License File
Software options must be activated by applying a license file (OPT-xyz):
Typically, VersaSync units are shipped with the license file pre-installed, reflecting the sys-
tem configuration as ordered. If, however, a feature is to be activated after delivery of the
VersaSync unit, please contact your local Orolia Sales Office first to have a license file gen-
erated. License files are archive files with a tar.gz extension. One license file may con-
tain multiple licenses for multiple products.
To apply the license file, you need to upload it into your VersaSync unit and install it:
1.
Save the license file license.tar.gz to a location on your PC (which needs to be
connected to the same network VersaSync is.)
2.
Open the VersaSync WebUI, and navigate to Tools > Upgrade/Backup:
3.
In the Actions panel, click Apply License File.
4.
In the Apply License File window, click Upload New File.
5.
In the Upload File window, click Choose File. Using the Explorer window, navigate
to the location mentioned under the first step, select the license file, and monitor
the installation progress in the Status Upgrade window until the application has
rebooted.
254
CHAPTER 4 • VersaSync User Manual Rev. 7.0
4.7 Updates and Licenses
To Next Page
Loading...
Need help?
General