3.
The NTP Access Restrictions Status window will display:
To ADD or EDIT an access restriction, click the PLUS icon or the Change but-
ton, respectively, and proceed to Step4. below.
To DELETE an access restriction, click the corresponding Delete button, and
confirm by clicking OK.
4.
The NTP Access Restrictions window will display:
Fill in the fields:
Restriction Type—Choose either Allow or Deny.
If you select “Deny”, the configured portion of the network will not
have NTP access to VersaSync, but the rest of the network will have
access to VersaSync. If you select “allow”, the configured portion of the
network will have NTP access to VersaSync, but the rest of the net-
work will not have access to VersaSync. By default, VersaSync allows all
IPv4 and IPv6 connections.
IP Version—Choose IPv4 or IPv6
IP Address—Enter the appropriate hostname.
Subnet Mask—Enter the appropriate IP mask.
124
CHAPTER 2 • VersaSync User Manual Rev. 7.0
2.8 Configuring Network Settings
To Next Page
Loading...