Orolia VersaSync

Table 4-1:
Default and recommended configurations
Feature Default Setting Recommended Setting
Where to
Configure
HTTP Enabled Disabled WebUI or CLI
SNMP Enabled Disabled or Enabled (with SNMP v3 w/
encryption*)
WebUI
NTP Enabled (with no MD5 val-
ues entered)
Enabled (use MD5 authentication with
user-defined keys)
WebUI
Daytime
Protocol
Enabled Disabled WebUI
Time Pro-
tocol
Enabled Disabled WebUI
Command Line Interface
Telnet Disabled Disabled (use SSH instead) Web UI
SSH Enabled (default private
keys provided)
Enabled Web UI
File Transfer
FTP Disabled Disabled (use SFTP or SCP) Web UI
SCP Available Disabled (use SFTP or SCP) Web UI
SFTP Available Disabled (use SFTP or SCP) Web UI
*Orolia recommends that secure clients use only SNMPv3 with authentication for secure
installations.
262
CHAPTER 4 • VersaSync User Manual Rev. 7.0
4.8 Resetting the Unit to Factory Configuration