Orolia VersaSync User Manual

without having to use the Command Line Interpreter (CLI).
You can access the Web UI either by using the default IP address, an automatically
assigned DHCP IP address, or by using a manually set static IP address (see "Assigning a
Static IP Address" on page36).
1.
On a PC connected to VersaSync via ETH1 or ETH0, start a web browser.
2.
Navigate to the IP address assigned or identified in "Initial Network Setup" on
page29.
3.
Log into the Web UI as an administrator. The factory-default administrator user
name and password are:
Username: spadmin
Password: admin123
Note: For security reasons, it is advisable to change the default cre-
dentials; see: "Managing Passwords" on page223.
4.
Upon initial login, you will be asked to register your product. Spectracom recom-
mends to register VersaSync, so as to receive software updates and services notices.
See also "Product Registration" on page343.
2.4 Accessing the WebUI
CHAPTER 2 • VersaSync User Manual Rev. 7.0
33

Orolia VersaSync Specifications

General

Brand	Orolia
Model	VersaSync
Category	Server
Language	English