Orolia VersaSync User Manual

Assigning a Static IP Address Using the Web UI:
1.
Enter the IP address identified during setup ("Initial Network Setup" on page29)
into the address field of your browser (on a computer connected to the VersaSync
network). If the network supports DNS, the hostname may also be entered instead
(the default hostname is "Spectracom"). The start screen of the VersaSync Web UI
will be displayed.
2.
Log into the Web UI as an administrator. The factory-default user name and pass-
word are:
Username: spadmin
Password: admin123
3.
If necessary, disable DHCP by navigating to MANAGEMENT > Network Setup. In
the Ports panel on the right, click the GEAR icon next to the Ethernet Port you are
using. In the Edit Ethernet Port Settings window, uncheck the Enable DHCPv4
field. Do NOT click Submit or Apply until you complete the next step to avoid error
messages.
4.
In the fields below the Enable DHCPv4 checkbox, enter the desired Static IP
address, Netmask, and Gateway address (if required). Click Submit.
For subnet mask values, see "Subnet Mask Values" on page342.
2.6 Setting up an IP Address
CHAPTER 2 • VersaSync User Manual Rev. 7.0
37

Orolia VersaSync Specifications

General

Brand	Orolia
Model	VersaSync
Category	Server
Language	English