Note that an invalid Certificate may result in denial of access to VersaSync via the
Web UI!
4.
Fill in the available fields:
Signature Algorithm: Choose the algorithm to be used from:
MD4
SHA1
SHA256
SHA512
Private Key Pass Phrase: This is the RSA decryption key. This must be at
least 4characters long.
RSA Private Key Bit Length: 2048 bits is the default. Using a lower number
may compromise security and is not recommended.
Two-Letter Country Code: This code should match the ISO-3166-1 value
for the country in question.
State Or Province Name: From the address of the organization creating up
the Certificate.
Locality Name: Locale of the organization creating the Certificate.
Organization Name: The name of the organization creating the Certificate.
Organization Unit Name: The applicable subdivision of the organization cre-
ating the Certificate.
Common Name (e.g. Hostname or IP): This is the name of the host being
authenticated. The Common Name field in the X.509 Certificate must match
the hostname, IP address, or URL used to reach the host via HTTPS.
Email Address: This is the email address of the organization creating the Cer-
tificate.
Challenge Password: Valid response password to server challenge.
Optional Organization Name: An optional name for the organization cre-
ating the Certificate.
Self-Signed Certificate Expiration (Days): How many days before the Cer-
tificate expires. The default is 7200.
You are required to select a signature algorithm, a private key passphrase of at least
4characters, a private key bit length, and the Certificate expiration in days. The
remaining fields are optional.
It is recommended that you consult your Certificate Authority for the required
fields in an X509-Certificate request. Orolia recommends all fields be filled out and
match the information given to your Certificate Authority. For example, use all
72
CHAPTER 2 • VersaSync User Manual Rev. 7.0
2.8 Configuring Network Settings
To Next Page
Loading...
Need help?
General