10. When internal storage is selected: You can export the internal record file to a
USB memory device. Insert the USB memory device into the front-panel USB
port on your instrument. Select Export in the bottom menu. The instructions
will be shown on the screen. The export file will be named as
"Multimeter_Recorder.csv". If a file with the same name already exists in the
USB memory device, it will be overwritten. (If you want to keep the existing file,
back up it to other location in advance.) Select Export in the bottom menu to
export.
How to chart the data
You can open the CSV file using Microsoft Excel, or your favorite spreadsheet
application, and create charts based on the data.
In the following steps, Microsoft Excel 2010 is used as an example.
1. Open Multimeter_Recorder.csv in Excel.
2. Select the data that you want to chart (see Figure 6-4).
3. On the Insert tab, in the Charts group, click Line, and then click Line in 2-D
Line (see Figure 6-5).
4. The chart will be displayed (see Figure 6-6). If you want to keep the chart, save
the file to XLS format.
To Next Page
Loading...
