Operator's Manual
Issue 14 / Mar 2016
MercuryiPS
©2016 Oxford Instruments NanoScience. All rights reserved.
Page 33
The keypad has a parameter box in the top-right corner that displays the text that has been
entered so far.
This keypad contains 10 character-entry keys and a decimal-point key.
Tap Del to delete the last entered character.
To delete or edit a single digit within the string, touch the character to highlight it, then tap
Del or tap the new character
To delete or edit several characters within the string, touch the characters until they are
highlighted, then tap Del or tap the new characters.
Tap OK to save the text that has been entered.
Tap CAPS to use capital letters. The characters on the keypad change to match the
selection.
Tap Quit to exit the keypad without saving the number that has been entered.
Each character-entry key represents several characters.
Tap a key once to enter the digit displayed on the key.
Tap a key twice to enter the first character displayed on the key.
Tap a key three, four, or five times to enter subsequent characters displayed on the key.
For example:
To Next Page