–––––––––––––––––––––
In a Polyphonic Sequencer and with overdub on,
you can record several layers of the arpeggios played.
–––––––––––––––––––––
Shift + Arp activates Hold. This way you can add and remove notes of the arpeggio without having
to hold them manually. If an arpeggio is held, exiting the Keyboard view or changing Sequencer won’t
turn it off, this way you can have 4 arpeggios held at the same time.
–––––––––––––––––––––
Use Hold with ARP off to create drones.
–––––––––––––––––––––
Hold can be used with the Roller as well.
· ROLLER
The Roller is a feature available in the Mono, Poly, Multitrack and Stochastic modes. It takes the
notes held on the keyboard to create rhythmic patterns.
In any of those modes press the keyboard button to go to the keyboard view.
13th column of the grid from the left is the Roll rate selection. From bottom to top the rate of the rolls
increases. The rate is absolute and not depending on the sequencer settings.
- 1/4 , 1/4T, 1/8 , 1/8T , 1/16 , 1/16T, 1/32, 1/32T
The roller will work with one (mono) or several notes (polyphonically) at once.
Press SHIFT + Hold to hold the notes of the keyboard and you will have the roller working on top of
them, creating another kind of rhythmic pattern.
To Next Page
Loading...