CONFIGURATION
This menu shows global parameters that affect OXI One as a whole. Some of them are presented as
customization options so the user has the best experience with the instrument. You can choose what
options adapt best to you.
To navigate through the list, use the first encoder. To advance to the next level of the menu press the
encoder button. The Configuration menu is divided in the following sections.
MIDI
● OXI Split selection. If activated, MIDI TRS would be compatible with the OXI Split increased
bandwidth. (Note: in the current HW version it is mandatory as well for Bluetooth to work)
● MIDI Transport Msgs Send. If activated, Clock, Start, Stop and Continue MIDI messages will be
sent through TRS, USB and Bluetooth.
● Start Stop Msgs Ignore. If activated, OXI One transport won’t be controlled externally.
● MIDI TRS Thru. If activated, OXI One will echo the MIDI messages received through TRS.
● MIDI USB Thru. If activated, OXI One will echo the MIDI messages received through USB.
● MIDI BLE Thru. If activated, OXI One will echo the MIDI messages received through Bluetooth.
● MIDI In channel filtering.
○ OFF: the Selected sequencer will listen to any incoming MIDI note from any channel.
○ MIDI Channel: every sequencer will listen to notes only from its own MIDI channel. In multitrack, if
all tracks share the same MIDI channel, all messages will go to track 1 only.
○ Ch & Note (MULTI): every sequencer will listen to notes only from its own MIDI channel and in
Multitrack mode, only the MIDI messages whose note matches the root note of any of the tracks
will be taken into account (drum mode).
● Scale note quantizing. Input notes are quantized to the scale of the sequencer that receives the
event.
● Send CC of MULTI muted tracks. If activated, muted tracks will still send modulation information.
● MOD-CC Smoothing Factor. If activated, modulation values will be interpolated between
consecutive steps. If deactivated, modulation values will be sent without interpolation (stepped
behavior).
● MIDI CC Smooth Factor. Changes the response curve of the interpolated modulation values. The
greater this value, the smoother the modulation curves will be.
● CC Transport Msgs Channel. Selects the MIDI channel where the transport CC messages (start,
stop, continue, rec) are sent.
ANALOG
● PPQ Out. Changes the pulses per quarter note OXI One sends through analog Clock Out. (24PPQ,
1PP16, 2PPQ, 1PPQ)
● PPQ In. Changes the pulses per quarter note OXI One receives on analog Clock In.(24PPQ,
1PP16, 2PPQ, 1PPQ)
● Reset/Start-Stop IN/OUT. Configures the behavior of the analog Reset/Start-Stop IN and OUT
signals.
To Next Page
Loading...