2.5.9 Logout
The Logout menu will logout of the user account, shut down or reboot (restart)
the system . You can use the desktop shortcut menu or enter [Main Menu] to
find this ‘Logout’.
Figure 2.21 Logout/Shutdown/Reboot the system
[Logout]: Log out of user account. You will be offered the user login
screen to enter into the user account.
[Shut down]: Quit the system. Turn off the power supply.
When press the shut down button, there is schedule hint. After three seconds,
the system is shut down. Cancel midway is of no effect.
[Reboot]: Quit the system. Reboot/restart the system.
2.5.10 Window switch
Preview in single window/four windows/eight windows/nine windows/sixteen
windows according to your choice.
2.5.11 SPOT
A BNC connector for a Spot monitor interface feature is only supported by
certain DVR models. The user can switch the SPOT output to split screen mode
via the context menu. When the SPOT monitor is connected via a BNC it will
only display the live video previews and not the user interface.
You can customise the SPOT monitor to display a array of multi panel view of
To Next Page
Loading...