2.11 System Info
This menu section displays the hard disk information, including HDD info, code
stream statistic, log info and version info.
2.11.1 HDD info
This menu section displays the hard disk’s current status, which includes; hard
disk type, overall capability, residual capability, the recording time, etc.
Figure 3.50 HDD info
Status Symbol key：
○ : Hard disk is normal.
X : Hard disk is not operating correctly/disconnected.
- : No hard disk connected. If the user needs to change the damaged hard
disk, you must shut down the DVR before uninstalling all the damaged
hard disk(s). If you do not do turn the power off to the DVR before you
replace the hard disk(s) you are in danger of harming yourselve via
an electric shock.
To Next Page
Loading...