Need help?Do you have a question about the OYN-X HDA and is the answer not in the manual?
Procedures for unpacking inspection and proper wiring installation of the DVR.
Step-by-step guide for connecting cameras, monitor, mouse, and power for initial setup.
Instructions for setting up remote access and live view via mobile smart devices.
Procedure for powering on the DVR and its initial startup sequence.
Methods for safely shutting down the DVR using soft and hard switch options.
Process of logging into the DVR system with user credentials for operation.
Configuring video recording settings, including modes, schedules, and types.
Setting up and managing various alarm detection functions like motion detection and video loss.
Customizing general, encoding, network, output, PTZ, and serial port settings.
Referencing the procedure for safely shutting down the DVR.
How to connect to and operate the DVR remotely using a web browser.
Potential reasons and solutions for the DVR failing to boot up correctly.
Diagnosing and resolving issues causing automatic reboots or system stoppages.
Troubleshooting steps when the DVR fails to detect the connected hard disk.
Addressing login failures when attempting to access the DVR via web or CMS.
To Next Page
General