[Write Log]: system will write a log to the system log list (See Chapter 3.6.3).
[Mobile reported]: Send a text message to a specified mobile phone number.
2.8.2 Video blind
When the input signal/video image from a connected camera produces no
video image or the lighting conditions are too dark, an alarm will be triggered.
This could be caused by an external force, e.g. someone purposely covering
the camera. You can set how the system will alarm and send notifications in the
same way as you can with the motion dection function (see previous chapter).
Note: Advanced button is same as clicking the right mouse button.
Figure 3.8 video blind
2.8.3 Video loss
When the device does not receive a channel video signal, the system will
trigger an alarm. You can set how the system will alarm and send notifications
in the same way as you can with the motion dection function (see previous
chapter).
To Next Page
Loading...