OYN-X HDA - Page 38

© Copyright OYN-X ®. All documentation rights reserved.
31
Video loss
robin, beep, EMAIL, FTP upload
Alarm input
Alarm output
Set the alarm mode: configuration, manual, off
Exception
Handling
No hard drive, hard disk error, lack of disk
space, off network events occurred after the
IP conflict time, setting the linkage
parameters: screen prompts or buzzer
Intelligent
analysis
Customisation of setup rules: perimeter guard,
care items, video diagnostics.
Set rules: show trail, sensitivity, minimum
travel distance, alert mode, and set the
linkage parameters: Arming time, alarm
output, the screen prompts, recording, PTZ,
round robin, beep, EMAIL, FTP upload, phone
reporting
System
settings
ordinary
settings
Set the system time, date format, time format,
language, hard disk full operation, the
machine ID, video format, output mode,
standby time, daylight saving time
Encoding
settings
Set each channel coding and combinations
coding main parameters: encoding mode,
resolution, frame rate, stream control, quality
type, code stream value, I frame interval
parameters, video / audio enabled; Note:
Mixed mode and full simulation mode only
encoding settings.
Network
Settings
Set basic network parameters, and set DHCP,
DNS parameters, network speed download
Network
Services
PPPOE, NTP, Email, IP permissions, DDNS
parameters
Output mode
Set the preview hint icon state, transparency,
resolution, VGA (HDMI) priority
RS485
Set protocol, address, baud rate, data bits,
stop bits, parity
Port settings
Set the serial port function, baud rate, data
bits, stop bits, parity
touring output
Set touring mode and interval
SPOT
settings
Set polling mode and the output of the interval
Spot
Channel
Management
Set channel mode, view the channel status,
and set the parameters of digital channels,
etc.
Management
tool
Hard disk
management
Set the specified hard disk drive to read and
write, to read-only disc, set to redundant disk,
clear the data, data recovery and other
operations