[DHCP]: When this box is ticked then the camera will be assigned an IP
address automatically.
[IP Address]: The IP address of the camera is used to login to the network, the
default is: 192.168.1.10.
[Subnet Mask]: Set the camera's subnet mask, so it can be consistent with the
login computer, default is 255.255.255.0.
[Default Gateway]: Set the default gateway of the camera, so it can be
consistent with the login computer, the default is 192.168.1.1.
[DNS Server]: Set the camera's DNS server, so it can be consistent with the
login computer. If the DNS is incorrect it may cause Cloud function to not work
properly.
[TCP port]: Set the camera's TCP port, the default port is: 34567.
[HTTP port]: Set the camera's HTTP port, the default port is: 80.
[HS Download]: Fast network download enable option.
[Transfer Policy]: Set the network transmission strategies, which can be;
adaptive / quality priority / smooth priority / network transmission priority.
Adaptive: when network bandwidth is low, the preview screen
automatically jump to sub-stream, to ensure a smooth preview.
Quality Priority: When the network bandwidth is large enough, the
preview screen is always displayed in the main stream, when the
bandwidth is too low under this setting then there will be a delay in the
video rate.
Smooth priority: Under no circumstances the frame rate will be reduced.
The encoder settings will change, reducing the size of the stream, to
ensure smooth screen.
To Next Page
Loading...